We can arrange a free site visit & give an estimated starting date.​
​​
We only use Genuine Colorbond Steel (Bluescope Steel) which has laser insignia on each panel.​​​
All Colours are the Same Cost & choosing a different colour frame to the sheeting is the same cost.​
​​Every Colorbond Post is set 600mm deep into the soil and at least one full 20kg Bag of Concrete is used for each hole.​
Colorbond Fencing can be built up to 2.4m in height.​
Heritage listed buildings needs council approval to build Colorbond Fencing.
​
We can remove an existing Brick Wall.
We can Double Sheet the new fence or lattice, making different colours on either side.
It will take approximately 1 to 2.5 days to build a new Colorbond Fence, 30m in length including demolition
& removal of the existing fencing.
A Treated Pine Timber Sleeper Retaining Wall will be needed if your ground level is different to the neighbouring property. To retain a higher or lower ground level. It is built directly beneath the new Colorbond Fence. The Treated Pine Timber Sleepers are all H4 Standard. They are $25 per Sleeper or Timber Post Upright.
​​​A Pool Fence must be 1.2m or more in height above the ground & have no more than a 10cm gap between
the bottom of the fence & the ground.
A Pool Gate must be self closing & open away from the Pool area.
​
Ph: 0421 233 434